Course overview

Build your career in Embedded hardware design

Embedded systems can be found in many industries including consumer electronics, automotive, aviation, transportation, agriculture, medical devices, and scientific research. It is also widely used in industrial automation including robotics, motion control systems, and Supervisory Control and Data Acquisition (SCADA) systems. Engineers with solid exposure to embedded system design can explore career in companies like BOSCH, Continental, Delphi, Samsung, LG, Panasonic & many industries which develop electronic products. This course focuses on hardware design in general for all applications & specialise to design hardware for EV industry applications & standards.

  • EV embedded hardware design course is hosted offline at Decibels office in Bangalore. Course duration is 12 months and it is limited to 5 participants intake. (Batch starting from 06th December 2021)

    Duration & Slots

  • Applications are now accepted for freshers or experienced up to 2 years, should be from the background of studies (BE/BTech/MTech) in Electronics & Electrical are accepted. (Program is also applicable for students who are planning to take up masters abroad in embedded systems)

    Who can apply

  • Participants can expect to get placed in embedded hardware design sector at OEM / Tier 1 / Tier 2 and at Engineering service companies. *** Average salary of placed students varied from 2 lakh to 3.9 lakh per annum.

    Placements

Key highlights of the course

Build projects to gain similar industry experience

  • The course is taught practically with the help of tools & software’s used in industry

  • The course consists of 10+ minor projects & 4 majors projects

  • The course will cover the complete life cycle of embedded product development

  • The course has the extensive depth of curriculum to meet any job profile for 0 to 2 years of experience bandwidth

  • Course graduates will be supported to start a career in core sector (100% placement guarantee)

Course curriculum


  • Circuit Design & simulation using LT-Spice
  1. Introduction of Electronic circuit simulation softwares
  2. Designing and simulating the circuits
  3. Filter circuit design & simulation using LT-Spice
  4. Circuit design using Operational Amplifiers & simulation using LT-Spice
  5. Circuit design using Semiconductor Devices & simulation using LT-Spice

 

  • PCB Design using KiCad
  1. Introduction to Circuit Design
  2. Introduction to PCB Design and EDA tools
  3. Schematic design in KiCad
  4. PCB artwork in KiCad
  5. PCB Design Rule Check
  6. Component Placement & Shielding
  7. Routing PCB Layout Routing and Grounding
  8. Footprint libraries & Drawings
  9. Introduction to industry standards such as IPC/IEEE/ISO/NMO
  10. Standard industry practices for PCB design

 

  • Minor projects on Hardware design
  1. Vehicle Body Control Module design
  2. Emulation board design for ECU functionality testing
  3. MIL indicator board design
  4. Low pass Amplifier
  5. Design of filter circuits for sensor data collection
  6. Design of Driver circuits


  • Major projects on circuit simulation & Hardware design
  1. BLDC motor controller design
  2. BMS design 
  3. EV charger design
  4. DC-DC converter design


  • Hardware prototyping & testing  
  1. Foundation to soldering
  2. PCB manufacturing & standards
  3. Assembling through hole component boards
  4. Assembling surface mount (SMD) component boards
  5. Robotics for component assembly
  6. Use of tools: Multimeter, Oscilloscope & signal generator
  7. Debugging the hardware
  8. End of line testing with software


  • Foundation to Embedded C
  1. Introduction to Embedded Languages
  2. Basics of Embedded C
  3. File handling
  4. Data Structures

 

  • Foundation to Microcontrollers & development boards
  1. Overview of Embedded systems
  2. Input/output devices 
  3. ADC/DAC
  4. Sensors, actuators, interrupts & timers 
  5. Embedded controllers
  6. Introduction to development boards
  7. Architecture and Block Diagram

 

  • Minor projects on Embedded C & Microcontrollers
  1. Obstacle Monitoring and avoidance system
  2. Automotive wiper system
  3. Acoustic Sound monitoring system

 

  • Foundation to communication protocols
  1. Embedded Communication protocols: URAT, SPI & I2C
  2. Automotive Communication protocols: CAN
  3. CAN BUS analyser tools

 

  • Minor projects on Communication protocols
  1. Real-time data collection from CAN-BUS from automotive.
  2. SPI Communication between systems


  • 1-D Modelling & scripting
  1. Matlab
  2. Simulink

Master Course Major Projects

Define your experience through

  • Simulate, Design, Fabricate, Test & validate the Sensored & Sensor-less BLDC motor controller

  • Simulate, Design, Fabricate, Test & validate the Battery Management System hardware

  • Simulate, Design, Fabricate, Test & validate the Level 1 - EV charger

  • Simulate, Design, Fabricate, Test & validate the DC-DC converter

Master Course Includes

  • Decibels ensure the job guarantee within course graduation or hires you as an intern with the stipend of 10,000 INR until you get placed with a satisfied role and salary package.

  • Lab access for practicals: You will work at Decibels Lab EV centre along your project mentor to gain real time & hands on exposure.

  • You will get to work on Real-world projects. Such projects will help you gain experience & build a competitive resume equivalent to working professionals in the industry.

  • Our team will handhold you for the technical learning, interview preparation, communication, presentation & publication skills, resume preparation, networking to ensure your overall preparation to become job ready.

Past Student placements

“Placed in Hero Electric”

Veerendra Chabbi

“Placed in DeltaX Automotive”

Harit Trivedi

“Placed in Robert Bosch”

Rudhra Manoj

“Ward Wizard Innovations & Mobility Ltd”

Yegeshwari Prajapati

“Placed in Binani Technologies”

Darshan Kuchade

“Placed in Robert Yulu”

Ganesh Pawar

“Placed in Decibels Lab Pvt Ltd (Internal hiring)”

Krishna Reddy

“Placed in Tata Technologies ”

Mohammed Amaan

“Placed in Renon Energy”

Sachin Patil

“Placed in Simple Energy”

Dipak Kamble

“Placed in VelEV”

Hariharan K

“Placed in Robert Bosch”

Sriram T

Course Fee & Payment Options

  • Electric Vehicle Embedded Hardware Design

    Fee is for participants seeking 100% placement guarantee (0% interest & Stop the payment anytime if you get placed before 12 months)

    12 x ₹15,000.00

    Enroll now

  • Electric Vehicle Embedded Hardware Design

    Fee is for students who are planning to take up masters abroad in Embedded systems

    8 x ₹15,000.00

    Enroll Now

Masterclass starts in

Start Date: 01 November 2021

  • 00 Days
  • 00 Hours
  • 00 Minutes
  • 00 Seconds
Book your counselling session